Diferencia entre revisiones de «Medidor de parpadeo de luz»

Sin resumen de edición
Sin resumen de edición
 
(No se muestran 3 ediciones intermedias del mismo usuario)
Línea 18: Línea 18:
#include "I2C_LCD.h"
#include "I2C_LCD.h"


const int COLLECTION_MS = 200;
const int COLLECTION_MS = 100;
const int SENSOR_LIMIT = 850;
const int SENSOR_LIMIT = 850;
const int SENSOR_BAJO = 200;
const int STOP_PIN = 3;
const int INTERRUPT_SETTLE_MS = 1000;


I2C_LCD lcd(39);
I2C_LCD lcd(39);
volatile bool run = true;
void stop() {
  if (millis() > INTERRUPT_SETTLE_MS) run = false;
}


void setup() {
void setup() {
Línea 27: Línea 36:
   Wire.setClock(100000);
   Wire.setClock(100000);
   lcd.begin(16, 2);
   lcd.begin(16, 2);
  pinMode(STOP_PIN, INPUT_PULLUP);
  attachInterrupt(digitalPinToInterrupt(STOP_PIN), stop, LOW);
}
}


Línea 32: Línea 43:
   int x_max = 0, x_min = 10000;
   int x_max = 0, x_min = 10000;
   unsigned long stop_ms = millis() + COLLECTION_MS;
   unsigned long stop_ms = millis() + COLLECTION_MS;
  int sample_count = 0;
   while (millis() < stop_ms) {
   while (millis() < stop_ms) {
     int x = analogRead(A0);
     int x = analogRead(A0);
     if (x > x_max) x_max = x;
     if (x > x_max) x_max = x;
     if (x < x_min) x_min = x;
     if (x < x_min) x_min = x;
    sample_count++;
   }
   }
  if (!run) return;


   lcd.clear();
   lcd.clear();
Línea 42: Línea 58:
   if (x_max > SENSOR_LIMIT) {
   if (x_max > SENSOR_LIMIT) {
     lcd.center(1, "demasiada luz");
     lcd.center(1, "demasiada luz");
  } else if (x_max < SENSOR_BAJO) {
    lcd.center(1, "falta de luz");
   } else {
   } else {
     float ratio = (float)x_min / x_max;
     float ratio = (float)x_min / x_max;
     lcd.center(0, ("ratio = " + String(ratio)).c_str());
     lcd.center(0, ("ratio = " + String(ratio)).c_str());
    lcd.center(1, ("samples = " + String(sample_count)).c_str());
   }
   }
}
}
</pre>
</pre>