Diferencia entre revisiones de «Mesa musical»
Ir a la navegación
Ir a la búsqueda
Sin resumen de edición |
|||
| Línea 15: | Línea 15: | ||
const int speaker_pin = 3; | const int speaker_pin = 3; | ||
const float base_duration_ms = 40; | |||
const float base_freq = 100.0; | |||
const float dynamic_pitch_factor = 5.0; | const float dynamic_pitch_factor = 5.0; | ||
const float dynamic_duration_factor = 10.0; | const float dynamic_duration_factor = 10.0; | ||
const float note_interval = 1.059463; | |||
const float detection_threshold = 0.4; | |||
const float note_interval = 1. | |||
const float detection_threshold = 0. | |||
const float sensitivity_factor = 20.0; | const float sensitivity_factor = 20.0; | ||
const float degree_offset = 3.0; | const float degree_offset = 3.0; | ||
const float baseline_iir_filter_coef = 0.6; | const float baseline_iir_filter_coef = 0.6; | ||
const range_t desired_range = ADXL345_RANGE_4_G; | |||
const dataRate_t desired_rate = ADXL345_DATARATE_3200_HZ; | |||
#define NUM_NOTES 33 | #define NUM_NOTES 33 | ||
| Línea 34: | Línea 36: | ||
Serial.begin(115200); | Serial.begin(115200); | ||
while (!accel.begin()) { | while (!accel.begin()) { | ||
Serial.println("accel.begin() failed | Serial.println("accel.begin() failed. We will retry."); | ||
delay(100); | delay(100); | ||
} | } | ||
while (accel.getRange() != desired_range) { | while (accel.getRange() != desired_range) { | ||
Serial.println("setting range"); | Serial.println("setting range"); | ||
| Línea 45: | Línea 46: | ||
} | } | ||
while (accel.getDataRate() != desired_rate) { | while (accel.getDataRate() != desired_rate) { | ||
Serial.println("setting rate"); | Serial.println("setting rate"); | ||
| Línea 78: | Línea 78: | ||
const int first_index = 0; | const int first_index = 0; | ||
const int last_index = | const int last_index = NUM_NOTES - 1; | ||
degree = max(degree, first_index); | degree = max(degree, first_index); | ||
degree = min(degree, last_index); | degree = min(degree, last_index); | ||
Revisión actual - 19:31 18 nov 2026
Fotos
Código
#include <float.h>
#include <Adafruit_Sensor.h>
#include <Adafruit_ADXL345_U.h>
const int data_points = 5;
const int speaker_pin = 3;
const float base_duration_ms = 40;
const float base_freq = 100.0;
const float dynamic_pitch_factor = 5.0;
const float dynamic_duration_factor = 10.0;
const float note_interval = 1.059463;
const float detection_threshold = 0.4;
const float sensitivity_factor = 20.0;
const float degree_offset = 3.0;
const float baseline_iir_filter_coef = 0.6;
const range_t desired_range = ADXL345_RANGE_4_G;
const dataRate_t desired_rate = ADXL345_DATARATE_3200_HZ;
#define NUM_NOTES 33
int notes[NUM_NOTES] = {0, 2, 3, 5, 7, 8, 10};
Adafruit_ADXL345_Unified accel = Adafruit_ADXL345_Unified();
void setup(void) {
Serial.begin(115200);
while (!accel.begin()) {
Serial.println("accel.begin() failed. We will retry.");
delay(100);
}
while (accel.getRange() != desired_range) {
Serial.println("setting range");
accel.setRange(desired_range);
delay(100);
}
while (accel.getDataRate() != desired_rate) {
Serial.println("setting rate");
accel.setDataRate(desired_rate);
delay(100);
}
pinMode(speaker_pin, OUTPUT);
for (int i = 7; i < NUM_NOTES; i++) {
notes[i] = notes[i - 7] + 12;
}
Serial.println("done with setup");
}
float old_max = 50;
void loop(void) {
float max = FLT_MAX * -1;
sensors_event_t event;
for (int i = 0; i < data_points; i++) {
accel.getEvent(&event);
max = max(event.acceleration.x, max);
}
max = sensitivity_factor * sqrt(sqrt(max));
const bool detected = (max - old_max) > detection_threshold;
if (detected) {
int degree = dynamic_pitch_factor * (max - old_max) - degree_offset;
const int first_index = 0;
const int last_index = NUM_NOTES - 1;
degree = max(degree, first_index);
degree = min(degree, last_index);
const float freq = base_freq * pow(note_interval, notes[degree]);
noTone(speaker_pin);
tone(speaker_pin, freq, base_duration_ms + dynamic_duration_factor * degree);
delay(degree);
old_max = max;
}
old_max = baseline_iir_filter_coef * old_max + (1 - baseline_iir_filter_coef) * max;
}