Diferencia entre revisiones de «Sensor de proximidad infrarrojo»

Sin resumen de edición
Sin resumen de edición
Línea 191: Línea 191:
   }
   }
    
    
}
</pre>
* Todo el código junto
<https://www.dfrobot.com/product-1121.html>
***************************************************
This example shows the basic function of library for DFPlayer.
Created 2016-12-07
By [Angelo qiao](Angelo.qiao@dfrobot.com)
GNU Lesser General Public License.
See <http://www.gnu.org/licenses/> for details.
All above must be included in any redistribution
****************************************************/
/***********Notice and Trouble shooting***************
1.Connection and Diagram can be found here
<https://www.dfrobot.com/wiki/index.php/DFPlayer_Mini_SKU:DFR0299#Connection_Diagram>
2.This code is tested on Arduino Uno, Leonardo, Mega boards.
****************************************************/
#include "Arduino.h"
#include "DFRobotDFPlayerMini.h"
#include <SoftwareSerial.h>
SoftwareSerial softSerial(/*rx =*/4, /*tx =*/5);
#define FPSerial softSerial
DFRobotDFPlayerMini myDFPlayer;
void printDetail(uint8_t type, int value);
void setup(){
  pinMode(A0, INPUT_PULLUP);
  pinMode(8, OUTPUT);
  Serial.begin(9600);
#if (defined ESP32)
  FPSerial.begin(9600, SERIAL_8N1, /*rx =*/D3, /*tx =*/D2);
#else
  FPSerial.begin(9600);
#endif
  Serial.println();
  Serial.println(F("DFRobot DFPlayer Mini Demo"));
  Serial.println(F("Initializing DFPlayer ... (May take 3~5 seconds)"));
 
 
  while (!myDFPlayer.begin(FPSerial, /*isACK = */true, /*doReset = */true)) {  //Use serial to communicate with mp3.
    Serial.println(F("Unable to begin:"));
    Serial.println(F("1.Please recheck the connection!"));
    Serial.println(F("2.Please insert the SD card!"));
  // while(true){
    //  delay(0); // Code to compatible with ESP8266 watch dog.
    //}
    delay(1000);
  }
  Serial.println(F("DFPlayer Mini online."));
 
  myDFPlayer.volume(20);  //Set volume value. From 0 to 30
// myDFPlayer.play(1);  //Play the first mp3
  myDFPlayer.loop(1);
  //int analogPin = 11;
  pinMode (11, OUTPUT);
  int val = 51;
  //for (int i = 0; i < 100; i++) {
    analogWrite(11, val);
  //}
 
 
}
void loop() {
  digitalWrite(8, HIGH);
  delay(1);
  int max_enc = 0;
  for (int i = 0; i < 100; i++) {
    int v = analogRead(A0);
    if (v > max_enc) max_enc = v;
   
  }
 
  digitalWrite(8, LOW);
  delay(1);
  int max_apa = 0;
  for (int i = 0; i < 100; i++) {
    int v = analogRead(A0);
    if (v > max_apa) max_apa = v;
  }
  int difference = max_apa - max_enc;
  Serial.println("0 300 " + String(difference));
  delay(50);
  //entre 0 y 255
/*
  if (difference > 100){
    analogWrite(11, 255);
  } else {
    analogWrite(11, 0);
  }
  */
 
  if (difference < 0) difference = 0;
  if (difference > 255) difference = 255;
  analogWrite(11, difference);
}
}
</pre>
</pre>